The Game

For Those Just Beginning

The aim of the game is simple. Get your bowls as close as possible to a small white ball called the ‘jack’. It might sound easy, but the fact that the bowls do not travel in a straight line seriously adds to the tactical challenge. Bowls can be played indoors or outdoors, and the rules are the same, with top stars from both formats coming together to play lawn bowls at the Commonwealth Games.

All the action takes place on a standard bowling green, which is a flat square 34-40m long. This is divided into six playing areas called rinks. After a coin toss, the first bowler (the lead) places the mat and rolls the jack to the other end of the green as a target. The jack must travel at least 23 mtr and when it comes to rest, it is moved across to the centre of the rink.
The players then take turns to bowl.

When all the bowls have been played, a competitor or team gets one point for each of their bowls that is closer to the jack than the opponent’s closest bowl. After all the bowls have been delivered, the direction of play is reversed. This is the end of an end!

Bowls can be played in singles, pairs, triples and four-player teams.
Each player has four bowls per end in singles and pairs competitions, three in triples, and two in fours. At the Commonwealth Games in Melbourne, players had four bowls each per end in the singles, and two each per end in the pairs and triples competitions. There was no four-player event.

The team captain, or ‘skipper’, always plays last and is instrumental in directing the team’s shots and tactics.

Scoring systems vary for different competitions.
It is usually the first player to reach 21 points, or the highest scorer after 18 or 21 ends.
Another system used is “set play”. For example, the first to reach seven points is awarded a set, with the match played best-of-five sets. The matches at the Commonwealth Games were best of three sets. Each set was won by the highest scorer after nine ends and, if a third set was required, a tie-break was decided over three extra ends. This system is based on winning ends, not total number of points.

The bowls are not quite round. They are shaved on one side which gives them the bias.
As the bowl slows, it begins to roll in the direction of the bias. Bowlers will therefore change the side of the bias, depending on the direction in which they want the bowl to curve. The challenge of all shots is to be able to adjust line and length accordingly. The faster the delivery, the smaller the curve.

Draw shot: This allows the bowler to roll the bowl to a specific location without disturbing the other bowls too much. For a right-handed bowler, ‘forehand draw’ is initially aimed to the right of the jack, and curves in to the left.

The same bowler can deliver a ‘backhand draw’ by turning the bowl over in the hand and curving it the opposite way, from left to right. In both cases, the bowl is usually rolled as close to the jack as possible.

The drive: Involves bowling with considerable force with the aim of knocking either the jack or a specific bowl out of play. There is very little curve on this shot.

Upshot or yard on: Involves delivering the bowl with enough power to move the jack or disturb other bowls, but without killing the end.

Bowls reaching the ditch are removed from play. However, if they touch the jack before heading into the ditch they remain ‘alive’ and in play. If the jack is knocked into the ditch it remains ‘alive’ unless it is out of bounds to the side of the rink. This is called a ‘dead’ end and is replayed.

There can be a large number of bowls on the green towards the conclusion of an end – particularly in the team games – and this gives rise to some complex tactics.
For example, the team with the closest bowl will probably decide not to aim for being close to the jack. It is probably in their interest to opt for a more blocking shot by setting their bowls up to make it difficult for opponents to get their bowls in towards the jack. This area is called ‘the head’. Or players will try to get their bowls in places where the jack might be deflected to if the opponent attempts to disturb the head.

There are thousands of bowling clubs across the UK, where you can learn the basics or play in leagues on a more serious level. It’s a game you can enjoy at any age, and with no experience – all clubs will encourage anyone wanting to learn or develop their skills.
You can also can play all year round – indoor bowls in the winter and out on the greens in the summer. The British Isles Indoor Bowls Council has good information about the indoor game and details on clubs in the UK.

Bowls Etiquette
Rules of etiquette for lawn bowling include
(but are not limited to):

1. Players and spectators at the head end should stand still when a bowler is on the mat and about to bowl.
2. There should be no trespassing over neighbouring rinks; this includes going to or from the clubhouse, moving to better see the jack, and particularly when walking from one end of your green to the other. Please be aware of others playing. If you are helping your team mate aim, do so by standing behind the back board.
3. After bowling each bowl, step off the mat to the right. As you approach the mat to bowl, do so from the rear left. Though not essential, this is a useful habit of convenience to avoid collisions!
4. Always show good sportsmanship by acknowledging a display of good skill by another bowler.
5. Avoid delaying play by leaving the rink without the knowledge of the other players.
6. Avoid interfering with the head until the results of the end have been agreed upon by the three’s.
7. Bowlers should shake hands at the end of a game.
8. The plinth area of the green is fragile and should be treated with care. This includes, but is not limited to, wearing proper footwear, not dropping or tossing bowls on the green, and not spitting or pouring liquids (water, coffee, etc.) on the green.
9. Punctuality for all games is a courtesy to the other players.
10. While standing at the head end waiting for the player on the mat to bowl, stand between the markers so the bowler can see and use the markers to aim.
11. When a bowl hits another bowl in play, it’s important that the three or skip at the “head” end signal to the bowler on the mat whether the struck bowl is yours (generally by tapping your shoulder) or the other teams (generally by tapping your knee).
12. Bowlers not using the pushers after an end should assist by kicking the bowls into an approximate line, thus making raking easier and faster.
13. Players at the head end should be ready to stop deflected bowls from crossing into the adjacent rink and interfering with neighbouring games; likewise, be alert to prevent bowls from adjacent rinks from messing up your own head. Pay attention!
14. At CPBC we have no objections to bowlers running after their bowl (we neither discourage enthusiasm nor youthful fitness) but you must to arrive at the head before your bowl stops.
15. All bowlers are urged to have chalk and a measuring tape when bowling so that bowls that touch the jack can be immediately marked and, if necessary at the finish of an end, measuring can be undertaken without delay.
16. All bowlers should remember to clear the equipment from your rink after your game.
Note: This is a brief summary, but all you need to get started. The most valuable lessons come from joining games.